Coconut Diethanolamide (CDE)

Coconut Diethanolamide (CDE) is a surfactant and foam booster derived from coconut oil.

Section 1: Identification

• Product Name: Coconut Diethanolamide (CDE)
• Synonyms: Cocamide DEA, Coconut DEA, Cocamide diethanolamine
• CAS Number: 68603-42-9
• Uses: Surfactant, foaming agent, emulsifier in shampoos, soaps, and cosmetics.

Section 2: Hazard Identification

• Classification: Skin irritation (Category 2), Eye irritation (Category 2A), Carcinogenicity (Category 2)
• Label Elements:
  • Signal Word: Warning
  • Hazard Statements:
    • H315: Causes skin irritation.
    • H319: Causes serious eye irritation.
    • H351: Suspected of causing cancer.
  • Precautionary Statements:
    • P201: Obtain special instructions before use.
    • P202: Do not handle until all safety precautions have been read and understood.
    • P264: Wash hands thoroughly after handling.
    • P280: Wear protective gloves/eye protection/face protection.
    • P302+P352: IF ON SKIN: Wash with plenty of water.
    • P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
    • P332+P313: If skin irritation occurs: Get medical advice/attention.
    • P337+P313: If eye irritation persists: Get medical advice/attention.
    • P308+P313: IF exposed or concerned: Get medical advice/attention.
    • P362+P364: Take off contaminated clothing and wash it before reuse.

Section 3: Composition/Information on Ingredients

• Chemical Name: Coconut Diethanolamide
• Components: Cocamide DEA

Section 4: First-Aid Measures

• Eye Contact: Rinse immediately with plenty of water for at least 15 minutes. Seek medical attention if irritation persists.
• Skin Contact: Wash with soap and water. Remove contaminated clothing. Seek medical attention if irritation develops.
• Inhalation: Move to fresh air. If symptoms persist, seek medical attention.
• Ingestion: Rinse mouth with water. Do not induce vomiting. Seek medical attention if large amounts are ingested or if symptoms occur.

Section 5: Fire-Fighting Measures

• Suitable Extinguishing Media: Water spray, dry chemical, carbon dioxide, foam.
• Specific Hazards: Combustible material. Can form explosive mixtures at temperatures at or above the flashpoint.
• Protective Equipment: Use self-contained breathing apparatus and full protective clothing.

Section 6: Accidental Release Measures

• Personal Precautions: Avoid contact with skin and eyes. Ensure adequate ventilation. Wear protective equipment.
• Environmental Precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains or waterways.
• Methods for Cleanup: Contain and collect spillage with non-combustible absorbent material (e.g., sand, earth, diatomaceous earth, vermiculite). Place in container for disposal according to local regulations. Avoid generating dust.

Section 7: Handling and Storage

• Handling: Avoid contact with skin and eyes. Avoid dust formation. Use in well-ventilated areas. Keep away from heat and sources of ignition. Ground/bond container and receiving equipment.
• Storage: Store in a cool, dry place. Keep container tightly closed. Store away from incompatible materials such as strong oxidizing agents.

Section 8: Exposure Controls/Personal Protection

• Engineering Controls: Ensure adequate ventilation, especially in confined areas.
• Personal Protective Equipment:
  • Eye Protection: Safety goggles or face shield.
  • Skin Protection: Protective gloves (nitrile rubber recommended).
  • Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment.

Section 9: Physical and Chemical Properties

• Appearance: Pale yellow to amber liquid or solid.
• Odor: Mild, characteristic odor.
• pH: 9-11 (10% solution)
• Melting Point: 21-24°C (70-75°F)
• Boiling Point: Not available.
• Flash Point: Approximately 178°C (352°F)
• Solubility: Soluble in water, ethanol, and other organic solvents.

Section 10: Stability and Reactivity

• Stability: Stable under recommended storage conditions.
• Incompatible Materials: Strong oxidizing agents.
• Hazardous Decomposition Products: Carbon oxides (CO, CO2), nitrogen oxides (NOx).

Section 11: Toxicological Information

• Acute Toxicity: Low acute toxicity.
• Skin Corrosion/Irritation: Causes skin irritation.
• Serious Eye Damage/Irritation: Causes serious eye irritation.
• Respiratory or Skin Sensitization: Not classified.
• Carcinogenicity: Suspected of causing cancer. Listed by IARC as Group 2B (possibly carcinogenic to humans).

Section 12: Ecological Information

• Ecotoxicity: May be harmful to aquatic life.
• Persistence and Degradability: Readily biodegradable.
• Bioaccumulative Potential: Low potential for bioaccumulation.

Section 13: Disposal Considerations

• Waste Disposal Methods: Dispose of in accordance with local, regional, national, and international regulations.

Section 14: Transport Information

• UN Number: Not regulated.
• UN Proper Shipping Name: Not applicable.
• Transport Hazard Class: Not applicable.

Section 15: Regulatory Information

• Regulations: Complies with various international chemical safety regulations.